MIL-DTL-82161C(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/I
NDL
LPR
N
Seam crotch lining to fronts.
11
a. The crotch lining shall consist
of lining material and shall extend
not less than one inch above fly
notch.
b. Fold crotch lining lengthwise
301
SSa-1
12-16
A
A
to form a double thickness and seam
or
to fronts or attach to fronts in
503
EFd-1
6-10
70/2
70/2
the overedge operation.
or
504
Seam darts in back.
12
Finished appearance. The darts
shall be properly positioned and
finished without pleats, puckers,
or gathers. In the finished
trousers, the darts shall be well
tapered to a flat point at lower
end and shall extend to the pocket
opening.
a. Fold the backs, matching the
301
SSa-1
12-16
A
A
cut edges of the waist darts. Seam
lengthwise along the entire length
of the dart, starting 3/8 inch from
the cut edges at the top end and
tapering to a point at the lower
end as indicated by marks on
patterns.
b. Spread open and press darts
smooth and flat with heated
pressing iron or pressing machine.
13
Attach watch pockets.
Finished appearance. The completed
watch pocket openings shall not be
stretched and the material shall
not be exposed on the outside.
a. Position the pockets on the
301
SSe-2
12-16
40/3
A
outside of the fronts at the pocket
(a)
notches for the pocket openings.
Seam the front part of the pocket
only to the front of trousers 3/8
inch from the top edge, from notch
to notch.
14
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business