A-A-52112B
Product Demonstration Model. When required, offerers shall submit samples of their intended production. The product demonstration model will consist of units independently developed. Product demonstration models will be analyzed and evaluated by the government. Evaluation criteria and basis for award are contained in the solicitation. Product demonstration models will be retained by the government. One (1) product demonstration model approved by DPSC under the resultant contract will serve as a manufacturing standard for the corresponding production items delivered under this contract. Offerers are advised that the product demonstration model does not relieve the successful offerer of his responsibility to perform in accordance with the commercial item description specified above.
Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable.
Quality Assurance
Certification. The contractor shall certify that the product offered meets the salient characteristics of this description and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices. The government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Reliance on contractor quality assurance systems shall not relieve the contractor of the responsibility of ensuring that all products or supplies submitted to the government for acceptance comply with all requirements of the contract.
Examination. Shirts lots shall be inspected in accordance with “Sampling Procedures and Tables for Inspection by Attributes”, ANSI/ASQC Z1.4, published by the American Society for Quality Control.
Visual Examination. The shirts shall be examined for the defects listed below. The lot size shall be expressed in units of shirts. The sample unit is one shirt. The inspection level shall be II and the acceptable quality level (AQL), expressed in terms of defects per hundred unit, shall be 6.5.
Defects. The shirts shall be examined for the following defects: any hole, cut, tear, broken, or missing thread or stitch; thread color not as specified; shaded part or shade variation; spot, stain, or woven-in waste; permanent fold, pleat, or crease; thread ends not trimmed; any component part not as specified or omitted; seam puckered, distorted, pleated, irregular or open loose or tight stitch tension; seam allowance not as specified;
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business