A-A-52112B
Label. The label shall be a nonwoven, spunbonded polyester cloth or nonwoven, mildew-resistant printed, acrylic coated, impregnated, 80/20 polyester/cellulose cloth, except that the label shall be yellow in color, located on the outside right front bottom (as worn), and contain the item name, shade number, contractor’s name, contract number, fiber content, and the following laundering instructions:
Laundering Instructions:
1. Wash with moderately hot water (115°F) using soap or mild detergent.
a. For machine washing. Use wash and wear cycle.
b. For hand washing. Do not wring or twist.
2. DO NOT SCRATCH, BLEACH OR USE FABRIC SOFTENER.
3. Dry in tumble dryer at warm setting. Remove immediately at end of drying. Shape and hang.
4. To drip dry, remove from water before last spin cycle. Shape and hang.
5. If touch-up ironing is required, iron at a moderate or synthetic material heat setting.
DO NOT REMOVE THIS LABEL
As an alternate, the printed cloth label may be separated into two labels; one stating the identification information and one stating the instruction information. The labels shall be yellow and the identification label shall be located on the outside left front bottom (as worn), and the instruction label shall be located on the outside right front bottom (as worn).
The shirts shall also have a size label. The label shall be marked on the center of the collarstand by either direct printing, stamping, or stenciling, and shall not be less than 1/4 inch from the seam joining the collarstand to the neck. The label shall show “good” colorfastness to laundering in accordance with AATCC Test Method 61.
Label/tag. Each shirt shall be individually bar-coded with the Type VIII, Class 17 label/tag of DDD-L-20. This label/tag shall be located so that it is completely visible on the packaged garment and shall cause no damage to the garment.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business