A-A-52112B
|
EXAMINE |
DEFECT |
|
Content |
Number of items in container is more or less than required.
NSN shown on one or more items not as specified on shipping container. |
|
Palletization |
Length, width, or height exceeds specified maximum requirements
Pallet type not as specified
Load not bonded as specified |
End Item Performance Testing.
Seam appearance rating. Seam appearance rating shall be carried out according to AATCC test method 143. Prior to evaluation, the shirts shall be laundered 3 times using the following conditions from Table I of the test method:
Machine cycle 3- permanent press
Wash temperature IV- 120 ± 5°F
Drying procedure A III- tumble dry, permanent press
After laundering, the buttons shall be fastened and the shirts hung on clothes hangers to condition for a minimum of 4 hours at 70°F and 65% RH (standard conditions for textile testing). The buttoned shirts shall be hung on the viewing board in such a manner that the shirt lies flat on the surface of the board and shall then be evaluated according to 9.1, 9.2, 9.3 and 9.5 of the test method. Seams appearing to fall between the numerical values of the photographic standards may be rated 1.5, 2.5, 3.5 or 4.5.
Reporting of results. Each rating value assigned by each of the observers shall be recorded. The average of the rating values assigned by the 3 observers to the same area shall be the rating value for that area. If the rating of the same area by two observers made for that area shall be discarded and the area shall be re-evaluated by 3 different trained observers. Minimum seam appearance ratings for the different areas shall be as follows:
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business