A-A-52112 Shirt, Man's

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14

A-A-52112B

Schedule of sizes- inches

Salient characteristics: The shirt shall be a ling-or-short-sleeve dress style with a standup collar and yoke. The shirt shall have a seven button front and two pleated breast pockets with button through flaps. It shall also have a pen pocket inside the left breast pocket, approximately 2-1/4 inches wide, hemmed at the top open at the bottom, and vertically stitched at the center, forming two compartments. The shirt shall have tapered shoulder loops, cuffs (Type I) and a collar with collarstand. The collar shall contain collar stays. The top piles of the shoulder loops, pocket flaps, cuffs (Type II), collar and collarstand shall have a fusible interlining. The shirt shall be of a safety stitch construction (See Figures 1 and 2).

Shoulder loops. The tapered shoulder loops shall be approximately 2 inches wide at the armhole and 1-1/2 inches wide at the pointed end and shall be stitched 3/16 to 1/4 from the edge. Each shoulder loop shall have a buttonhole centered not more than 1/8 inch off center and 3/8 to 1/2 inch from point of loop. The shoulder loops shall loops shall be positioned so that the loop is 1 (± 1/8) inch in front of shoulder seam at the armhole, and 1/4 (± 1/8) inch in back of shoulder seam at the neck and so that it finishes 3/8 (± 1/8) inch from the collar joining seam.

Collar. The collar points shall finish 3-1/8 (± 1/16 inches in length and shall have two unslotted, slotted or ultrasonically fused stay measuring 2-3/4 to 2-7/8 inches long and 3/8 to 1/2 inch wide. The collar ends shall be centered at equal distances from the center of the shirt front and shall open 5/8 inch to 7/8 inch when the collar is buttoned.