A-A-52112B
Reporting of results. Each rating value assigned by each of the observers shall be recorded. The average of the rating values assigned by the 3 observers to the same area shall be the rating value for that area. If the rating of the same area by two observers differs by more than 1.0, the rating of all three observers made for that area shall be discarded and the area shall be re-evaluated by 3 different trained observers. Minimum seam appearance ratings for the different areas shall be as follows:
|
Parts |
Minimum Average of 3 observations |
|
Fused collar |
3.8 |
|
Fused shoulder loops |
3.8 |
|
Fused pocket flaps |
3.8 |
|
Pockets |
2.8 |
|
Armholes |
2.8 |
|
Sleeve hems |
2.8 |
|
Side seams |
2.8 |
|
Underarm seams |
2.8 |
|
Yoke |
2.8 |
Fusible resistance to laundering. After the shirt has been laundered 3 times, using the same laundering conditions as for seam evaluation above, the shirt shall show no bubbling or delamination of the fused plies of material. There shall be no showing of “strike through” of the adhesive after fusing. Additionally, the shirt shall show no delamination or curling of the ultrasonically fused collar stays (when used).
Durable press and crease-resistant treatment. Approval of the durable resin for utilization under this document is the responsibility of the US Army Natick Research, Development, and Engineering Center, Natick MA, 01760-5014 and is based on extensive tests, including those for toxicity which are not set forth in this document. Because of the time necessary to conduct a full evaluation (approximately 6 months), only those treatments approved and so listed in the invitation for bids or request for proposals shall be considered acceptable for related procurement.
Packaging. Each shirt shall be folded to approximately 14-1/2 by 10-1/2 inches and packaged in a plastic bag.
Packing. Seventy-two shirts shall be packed in a fiberboard box conforming to style RSC-L, type CF (variety SW) or SF, class domestic, of PPP-B-636. The box shall be closed in accordance with the appendix of PPP-B-636.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business