MIL-DTL-29389B(MC)
however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3.
REQUIREMENTS
3.1. Standard sample. Standard samples are furnished solely for
guidance and information to the contractor (see 6.3). Variation
from this specification may appear in the sample, in which case
the specification shall govern.
3.2. First article. When specified (see 6.2), a sample shall be
subjected to first article inspection in accordance with 4.3.
3.3. Materials.
3.3.1 Basic material. The basic material shall be cloth, wool,
tropical, scarlet, shade 2502 (see 6.3), 10.5 ounce, conforming
to type V, class 1, style B of MIL-C-21115.
3.3.2 Lining. The material for the back, face interlining,
hanging pockets, back straps and eyelet opening and for lining
the fronts shall be cloth, rayon, scarlet, shade 2506 (see 6.3),
4.5 ounce, conforming to class 3 of MIL-C-368.
3.3.3 Front interlining. The material for interlining the vest
fronts and pocket welts shall be cloth, fusible, conforming to
type V, class 1, style B of MIL-C-44296.
3.3.4 Tape. The tape for the breakline for the lapel front,
button edge and for reinforcing the folded edge of the pocket
welt and front armholes shall be cotton, unbleached, 1/4 inch
wide conforming to type II, class 1 of A-A-52071, except the
requirement for nonfiberious material shall not apply.
3.3.5
Thread.
3.3.5.1. Silk thread. The silk thread shall conform to A-A-50196
except the requirement for extractable material shall not apply;
type I, ticket No. A, 3-ply for eyelets, bartacking and top and
edge stitching; ticket No. B and F, 3-ply for buttonholes, needle
and bobbin respectively; type III, ticket No. C, 2-ply for
handfelling.
3.3.5.2. Cotton thread. All inside seaming and stitching shall
be accomplished with cotton thread conforming to type III, ticket
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business