MIL-DTL-28920C(MC)
1/ The trousers shall be fastened and placed flat upon a table
except as otherwise indicated herein.
2/ Waist measurement taken from folded edge to folded edge on
waistband with waistband buttoned.
3/ Inseam measurement taken along inseam from crotch seam to
bottom edge of legs.
3.8. Workmanship. The finished trousers shall conform to the
quality and grade of product established by this specification.
3.9. Recycled, recovered, or environmentally preferable
materials. Recycled, recovered, or environmentally preferable
materials should be used to the maximum extent possible provided
that the material meets or exceeds the operational and
maintenance requirements, and promotes economically advantageous
life cycle costs.
4.
VERIFICATION
4.1. Classification of inspection. The inspection requirements
specified herein are classified as follows:
a.
First article inspection (see 4.3).
b.
Conformance inspection (see 4.4).
4.2. Inspection conditions. Unless otherwise specified, all
inspections shall be performed in accordance with the test
conditions specified in MIL-STD-1488.
4.3. First article inspection. When first article is required,
inspection shall be made of completely fabricated trousers for
all provisions of this specification.
4.4. Conformance inspection. Inspection shall be performed in
accordance with MIL-STD-1488.
4.4.1 Examination and testing. Examination for testing and
conformance shall be as stated in the contract.
4.4.2 Examination of the end item. Samplings and examination of
the end item shall be performed for dress (D) trousers in
accordance with the provisions of MIL-STD-1488.
35
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business