MIL-DTL-29451B(MC)
4.
VERIFICATION
4.1. Classification of inspection. The inspection requirements
specified herein are classified as follows:
a.
First article inspection (see 4.3).
b.
Conformance inspection (see 4.4).
4.2. Inspection conditions. Unless otherwise specified, all
inspections shall be performed in accordance with the provisions
set forth in ANSI/ASQC Z1.4.
4.3. First article inspection. When first article is required,
inspection shall be made of a completely fabricated jacket for
all provisions of this specification.
4.4. Conformance inspection.
4.4.1 Testing of components. Testing of components shall be in
accordance with the applicable subsidiary specifications and
standards to the extent applicable, except that this
specification shall govern in the event of conflict. The method
of testing specified in FED-STD-191, wherever applicable, shall
be followed.
TABLE III.
Test methods.
Reqmt.
Test
Components
Characteristics
para
method
Knit fabric for
Colorfastness to:
5660
cuffs, collar and
-light
3.3.2
waistband
-perspiration
5680 1/
3.3.2
-wet-dry cleaning
3.3.2
5622
-crocking
3.3.2
5651
1/
On the color transfer cloth, only the stain on the polyester
fiber shall be evaluated.
4.4.1.1. Sampling. Unless otherwise specified in subsidiary
specifications, sampling shall be in accordance with the
following. The lot shall be unacceptable if one or more sample
units fail to meet any test requirement specified herein.
24
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business