MIL-DTL-28920C(MC)
label shall conform to type VI, class 14 of DDD-L-20. The label
shall conform to the colorfastness and writing test requirements
of DDD-L-20. The content (inscription) and format of the
combination label shall be as follows:
Nomenclature:
Fiber Content:
Size:
Contract number:
Name of contractor:
DRY CLEAN ONLY
3.4. Design. The trousers shall be the U.S. Marine Corps design
as shown in Figures 1, 2, and 3, having a two-piece lined
waistband with outlet at center back, button french-type fly with
slide fastener closure, seven belt loops, side pockets with
straight opening, two back pockets with flaps to button, hip
darts, finished leg bottoms, with watch pocket, style A, or
without watch pocket, style B. The type II trousers shall have
ornamental gold lace; the types I and III trousers shall have
ornamental scarlet stripes, two inches wide for type I and 1-1/2
inches wide for type III.
3.5. Patterns. Standard patterns will be furnished to the
contractor by the Government. The standard patterns shall not be
altered in any way and shall be used only as a guide for cutting
the supplier's working patterns. The contractor's working
patterns shall be identical to the standard patterns. The
standard patterns provide a 1/2 inch allowance for crotch seam
and 3/8 inch allowance for all other seams, except as otherwise
specified herein, and seat seam outlet at waist in accordance
with patterns. The patterns provide a three inch allowance for
bottom turnup of legs. The standard patterns show size,
directional lines for cutting, and are marked and notched for
proper placement and assembly of the component parts.
3.5.1 List of pattern parts. The component parts for the
trousers shall be cut from the specified materials in accordance
with the pattern parts indicated below:
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business