A-A-55095A
3.4 Seams and stitches. All lockstitching shall have 10-12 stitches per inch. All overedge stitching shall
have 8-10 stitches per inch. All seams, except the seat seam and front crotch seam, shall be single
needle stitched face to face ½ inch from raw edges, the two raw edges shall be overedged together.
The seat seam shall be joined with a double lapped double stitched seam or with a double needle seat
seamer with two rows of stitching 1/64 to 1/32 inch apart. The front crotch seam shall be a mock
double lapped double needle seam. The top and sides of the pocket flaps, the sides and bottom of
breast and hip pockets, and the top, bottom and side of the front lower pockets shall be double stitched
1/16 inch from folded edge with a ¼ inch gage. The collar and front lapel shall be topstitched ¼ inch
from the edge. The lower hip pocket facing shall be edgestitched 1/16 inch from the inside folded edge.
The leg bottom shall have a rolled hem with stitching 1/16 to 1/8 inch from the inside folded edge. The
cuffs and waistband shall be edgestitched 1/16 inch from all folded edges. All stitching shall be
backtacked at least ½ inch if not crossed by another line of stitching. Belt loops shall be double stitched
not less than ¼ inch gage. Joining seams shall not stagger more than 3/8 inch as measured from center
of seam to center of seam.
3.5 Labels
3.5.1 Combination Label. Each coverall shall have a combination size, identification and care instruction
label positioned 2 (+1/2) inch down from neckline centered over center back seam on inside of
coverall. The label shall be stitched on all four sides. The color of the stitching thread shall match basic
material and the stitching shall not go through the printing. The printing shall be legible throughout the life
of the coverall. The combination size, identification and instruction label shall bear the following
inscription:
SIZE: 36R (example)
STOCK NUMBER: 8405-00-000-0000 (example)
COVERALL, UTILITY (65% POLYESTER AND 35% COTTON)
CONTRACT NO: SPO100-00-0-0000 (Example)
NAME OF CONTRACTOR:
NAME OF MANUFACTURER (if other than contractor)
CARE INSTRUCTIONS
MACHINE WASH-PERMANENT PRESS CYCLE
WARM WATER (1200 MAX), DO NOT MIX COLORS
DO NOT USE CHLORINE BLEACH
TUMBLE DRY WARM SETTING-REMOVE IMMEDIATELY
TOUCH UP WITH WARM IRON, IF NEEDED
OR
FOLLOW SHIPBOARD WASH FORMULA II
Note: The lengths Extra Short, Short, Regular, Long, Extra Long and Extra Extra Long may be
abbreviated as XS, S, R, L, XL, XXL.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business