A-A-55095A
B. Sleeve Inseam Measurement shall be taken from base of the armhole, along sleeve inseam to
bottom of sleeve including cuff.
C. Leg Inseam Measurement shall be taken from junction of crotch and back seam along leg inseam
to bottom of leg.
D. Center Back Length (Upper Torso)-Measurement shall be taken along the center back seam, from
center back neckline down to top of waistband.
E. Hip On front of coveralls, with slide fastener closed, twice the measurement taken across the
coverall, one inch above fly bartack, from folded edge to folded edge.
3.7 Finished appearance. Buttons should align with buttonholes and snaps should align with each other.
When the finished coverall is buttoned and snapped and slide fastener are fully closed, there shall be no
puckers, twists, or gaps in appearance on front of coverall.
3.8 Workmanship. After completion, the coveralls shall be cleaned, and all loose thread, lint and
foreign matter removed. Adhesive tape shade tickets shall be removed from the garment.
4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered
materials in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR) to the
maximum extent practicable.
5. QUALITY ASSURANCE PROVISIONS
5.1 Product conformance. The contractor shall certify and maintain substantiating evidence that the
product offered meets the salient characteristics of this commercial item description and that the product
conforms to the producer's own standards and quality assurance practices. The Government reserves
the right to require proof of such conformance prior to the first delivery and thereafter as may be
otherwise provided for under the provisions of the contract or purchase order.
5.2 End item examination. The visual and dimensional examination for defects shall be in accordance
with MIL-STD-1668, except that table I shall not be used. Lots of coveralls shall be inspected in
accordance with ANSI/ASQC Z1.4.
5.3 Acceptance criteria. Acceptance criteria shall be as specified in the contract or purchase order.
6. PACKAGING. The preservation, packing, and marking shall be as specified in the contract or
order.
7. NOTES
7.1 Source of Government documents. Copies of military and Federal documents are available from:
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business