MIL-DTL-28919B(MC)
3.8. Workmanship. The finished trousers shall conform to the
quality and grade of product established by this specification.
3.9. Recycled, recovered, or environmentally preferable
materials. Recycled, recovered, or environmentally preferable
materials should be used to the maximum extent possible provided
that the material meets or exceeds the operational and
maintenance requirements, and promotes economically advantageous
life cycle costs.
4.
VERIFICATION
4.1. Classification of inspection. The inspection requirements
specified herein are classified as follows:
a.
First article inspection (see 4.3).
b.
Conformance inspection (see 4.4).
4.2. Inspection conditions. Unless otherwise specified, all
inspections shall be performed in accordance with the test
conditions specified in MIL-STD-1488.
4.3. First article inspection. When first article is required,
inspection shall be made of completely fabricated trousers for
all provisions of this specification.
4.4. Conformance inspection. Inspection shall be performed in
accordance with MIL-STD-1488.
4.4.1 Examination of the end item. Samplings and examination of
the end item shall be performed for dress (D) trousers in
accordance with the provisions of MIL-STD-1488.
4.4.2 Dimensional examination. The dimensional examination
provisions for the finished trousers shall be as listed in Table
II and as specified in MIL-STD-1488.
5.
PACKAGING
5.1. Packaging. For acquisition purposes, the packaging
requirements shall be as specified in the contract or order (see
6.2). When actual packaging of material is to be performed by
Department of Defense (DoD) personnel, these personnel need to
contact the responsible packaging activity to ascertain requisite
packaging requirements. Packaging requirements are maintained by
35
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business