MIL-DTL-28950C(MC)
to be removed, provided the garment is subsequently given a
treatment by a dry cleaning agent in which the synthetic thread
is soluble. When this thread is used, any residue remaining on
the garment after the dry cleaning process shall be brushed off
or removed.
3.3.13.4. Color and colorfastness. All threads shall be black,
shade AA, cable No. 66043, (see DoD Standard Color Card of
Official Standardized Shades for Sewing Threads 1968) except
cotton thread for basting and for machine tacking armholes may be
white. The colored threads, when tested as specified in the
applicable thread specification, shall show good fastness to
light.
3.3.14 Gimp. The buttonhole gimp shall be cotton, ticket No. 8,
soft or glazed finish, conforming to type I or type II of
A-A-50198. The color of the gimp shall be black, shade AA, cable
No. 66043 showing good fastness to wet (dry) cleaning.
3.3.15 Buttons.
3.3.15.1. Insignia buttons. The insignia buttons shall be metal,
gold plated, officer design, 27-line and 40-line, regular shank
conforming to type I, style 4, class A, subclass 1 of
MIL-DTL-3461. Ring toggles for securing buttons to pockets shall
conform to MIL-DTL-3461.
3.3.15.2. Sewing hole buttons. The sewing hole buttons shall be
melamine formaldehyde composition, glossy finish, conforming to
type II, class D, style 4, 22-line, style 20, 34-line, and style
25, 16-line of V-B-871. The color shall be white for the collar
and black, shade BT, cable No. 62001 for the rest of the coat
(see DoD Standard Shades for Buttons 1966).
3.3.16 Fasteners, snap. The snap fasteners for the upper
pockets and flaps shall be brass, black japanned finish or black
chemical finish in accordance with MIL-F-495, followed by clear
lacquer coating, round or square style, rolled edge, size 1/0,
sew-on type.
3.3.17 Collar closure hook and eye. The hook and eye for
closing the collar shall be brass, black, japanned finish, or
black chemical finish, followed by a clear lacquer coating and
conform to the requirements of Figure 1.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business