A-A-50366A
3.3 Label. A commercial-type label is acceptable, provided that an additional printed cloth label containing the contractor's name, contract number, size and National Stock Number (NSN) is caught on the stitching of the commercial label. The commercial label shall include fiber and laundering information. The laundering instructions shall be as follows:
HAND LAUNDER IN LUKEWARM WATER USING A MILD SOAP. DO NOT WRING OR TWIST. RINSE IN CLEAR COLD WATER, RESHAPE, AND DRY FLAT.
3.3.1 Label/tag. Each item shall be individually bar-coded with a paper tag for personal clothing items. The paper tag shall be standard bleached sulfate having a basis weight of 100 pounds. The paper used for the tags shall have a smooth finish to accept thermal transfer and direct printing. The tags shall be clearly legible and readable by a scanner. The bar coding element shall be a 13 digit national stock number (NSN). The bar code type shall be a medium to high code density and shall be located so that it is completely visible on the item when it is folded and/or packaged as specified and so that it causes no damage to the item.
3.4 Weights. The weights of the finished sweater shall be as specified in Table II: TABLE II. Finished weights of sweaters 1/
1/ per dozen (minimum) conditioned
3.5 Sizes and measurements. The finished sweater shall conform to the measurements in
Table III. The measurements and tolerances are expressed in inches.
TABLE III. Finished measurements
A. Neck width. Measurement shall be taken from the intersection of the collarette seam and shoulder seam across neck front to similar intersection on opposite side.
B. Chest. Measurement shall be taken across front approximately 1 inch below armhole seams, folded edge to edge. When two full side seams are used, measure from seam to seam.
C. Length. Measurement shall be taken from the intersection of the collarette seam and shoulder seam perpendicular to bottom edge of skirt.
D. Overarm sleeve length. Measurement shall be taken along outside folded edge of sleeve from the intersection of the armhole seam and shoulder seam to the bottom edge of the cuff.
E. Armhole length. Measurement shall be taken from the intersection of the armhole seam and shoulder seam on a straight line to the intersection of the armhole seam and sleeve inseam.
Source: https://assist.dla.m3il -- Downloaded: Check the source to verify that this is the current version before use.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business