MIL-DTL-29389B(MC)
4.4.3.2. Detailed defects applicable to specific parts.
Detailed
defects shall be classified as follows:
Classification
Examine
Defect
Major
Minor
Alignment and
a. Outside of vest:
position of
1. Buttonhole on left front
254
buttonholes
not in same horizontal position
and eyelets
as eyelet on right front by more
than 1/4 inch.
2. Position of front
255
buttonhole from front edge:
- less than 1/4 inch or more
than 3/4 inch.
Length of
a. Unbuttoned fronts unequal in
256
front
length by more than 1/2 inch.
Lapels
a. Lapel facings.
1. Twisted, short or tight,
257
causing lapels to curl out,
affecting appearance.
2. Fullness or puckers,
258
affecting appearance.
b. Lapel edges.
1. Bulky, irregular, or not
259
properly forced out, causing
crooked edges, affecting
appearance.
c. Bridle tape.
1. Misplace, not serving
260
intended purpose.
2. Tape partly on creased edge
261
or on lapel side.
d. Lapel shape.
1. Not uniform i.e., right and
262
left top edge of lapels vary in
length by 1/4 inch or more.
2. Lapels poorly shaped or not
263
of uniform size or shape.
30
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business