A-A-55086A
(A) With slide fastener closed and waistband hooked, measure along top edge of waistband from
folded edge to folded edge. Multiply by two (2).
(B) Measure along inseam from crotch seam to (unhemmed) bottom edge of leg.
(C) Measure across unhemmed bottom edge of leg. Multiply by two (2).
3.6 Patterns. The Government will furnish a set of standard patterns to be used to cut working
patterns. The working patterns shall be identical to the Government patterns. Neither the
Government patterns nor the working patterns shall be altered in any way, except that additional
notches for use during construction are allowed on working patterns. Also, minor
modifications are permitted where necessary when using automatic equipment. These modifications
shall not alter the dimensional, serviceability, or appearance requirements. The
standard patterns provide a seam allowance of 3/8 inch for all seams except for 1/2 inch allowance for
the inseams, outseams, pocket facing and assembly, and joining the seat seam. In addition, the back
seat seam allowance shall be 1-1/8 inches at the top tapered to 1/2 inch at the crotch.
3.6.1 Pattern parts. The component parts shall be cut from the materials specified in accordance with
the following pattern parts:
Material
Pattern parts
Cut parts
Basic material
Front
2
Back
2
Side pocket bearer
2
Side pocket facing
2
Hip pocket bearer/facing
4
Waistband
2
Right fly
1
Left fly facing
1
Left fly interlining
1
Pocketing and lining
Side pocket
2
Hip pocket
2
Right fly lining
1
____________________________________________________________________
4. REGULATORY REQUIREMENTS.
4.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered or
environmentally referable materials should be used to the maximum extent possible provided that the
material meets or exceeds the operational and maintenance requirements, and promotes economically
advantageous life cycle costs.
5. PRODUCT CONFORMANCE PROVISIONS
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business