A-A-55086A
above (see figure 1); and shall measure 5/8 to 3/4 inches wide with a 1-3/4 to 1-7/8 inch opening (see
figure 2). There shall be one belt loop on each front in accordance with notches on pattern, one on
each side seam, one centered on each back, and one at center back aligned with seat seam. The extra
belt loop for sizes 38 and above shall be on the right front, 1-1/4 to 1-3/4 inches from right fly joining
seam. The trouser shall have a "J" stitched front slide fastener fly; two (2) straight side pockets with one
row 1/4 inch topstitching and shall have a 6 to 6-1/2 inch opening. The trouser shall have two (2)
double welt hip pockets and shall measure 5-1/4 (+ 1/8) inches wide and 6-1/4 (+ 1/4) inches in depth
with a button and buttonhole on left pocket. The trouser shall be pressed smooth at the top including
the fly and the legs shall be creased in the center with the seam matching at the bottom and in the crotch.
3.2 MATERIAL.
3.2.1 Basic material. The basic material shall be a 65% polyester/35% cotton twill in accordance with
CG-CDTO-T-0800. The color shall be Blue 3362.
3.2.2 Pocketing and lining. The cloth for the pockets, waistband lining, and right fly lining shall be
polyester, polyester/cotton, or polyester/rayon twill. The color shall be Black. The cloth shall have a
minimum weight of 4.3 oz/sq yd and a minimum breaking strength of 72 pounds (warp) and 55 pounds
(filling) when tested as specified in ASTM-D-5034.
3.2.3 Interlining. The material for interlining waistbands shall be a polyester or polyester/cellulose blend
non-woven having a minimum weight of 3.0 oz/sq yd and be equivalent to commercial industry
standards.
3.2.4 Thread. The thread shall be a cotton-covered polyester thread conforming to ticket number 50
or 70, 2 or 3-ply for seaming and stitching, ticket number 50 for bartacks and buttonholes, and ticket
number 16 or 24 for button sewing. The color shall be black. The thread shall show "good"
colorfastness to laundering and light when tested in accordance to AATCC 61, Test 3A and AATCC
16 Option A, respectively.
3.2.5 Gimp. The gimp for reinforcing the buttonholes shall conform to Type I or II, size No 8. The
color shall be black. The gimp shall show "good" colorfastness to laundering and light when tested to
AATCC 61, Test 3A and AATCC 16 Option A, respectively.
3.2.6 Button. The button for the left hip pocket shall be flat, 4 hole melamine plastic, 22-line. The
color shall be Black BT, Cable No. 62001 with a glossy finish.
3.2.7 Slide fastener. The slide fastener shall be non-separating, non-reversible cam lock, size
light medium, short tab pull. All metal components of the slide fastener shall be brass and the
semi-automatic pin lock cover and spring shall be stainless steel. A staple bottom stop is required. The
color of the tape shall be Black G, Cable No. 66507. As an alternate, a continuous monofilament nylon
or polyester coil chain with polyester or polyester/cotton blend tape and
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business