MIL-DTL-29451B(MC)
Classification
Examine
Defects
Major
Minor
A
B
c. Bi-swing pleat poorly
248
constructed, affecting
appearance.
4.4.3.4. Examination of finished measurements. Any finished
measurement deviating from the finished measurements specified in
3.7 or sleeve lengths of any jacket uneven by 1/2 inch or more
shall be classified as a finished measurement defect.
5.
PACKAGING
5.1. Packaging. For acquisition purposes, the packaging
requirements shall be as specified in the contract or order (see
6.2). When actual packaging of material is to be performed by
Department of Defense (DoD) personnel, these personnel need to
contact the responsible packaging activity to ascertain requisite
packaging requirements. Packaging requirements are maintained by
the Inventory Control Point's packaging activity within the
Military Department of Defense Agency, or within the Military
Department's Systems Command. Packaging data retrieval is
available from the managing Military Department's or Defense
Agency's automated packaging files, CD-ROM products, or by
contacting the responsible packaging activity.
6.
NOTES
(This section contains information of a general or
explanatory nature that may be helpful, but is not mandatory.)
6.1. Intended use. The jacket covered by this specification is
intended to be worn by personnel of the U.S. Marine Corps.
6.2. Acquisition requirements.
Acquisition documents must
specify the following:
a.
Title, number, and date of the specification.
b.
Issue of DoDISS to be cited in the solicitation, and if
required, the specific issue of individual documents referenced
(see 2.2).
c.
Packaging requirements (see 5.1).
34
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business